Tungsten Copper Wear Resistance

Tungsten copper wear resistance material for a lining of a blast-furnace tuyere sleeve, which is prepared by the following raw materials in percentage by weight: 40-60% of nano copper powder, 36-56% of nano tungsten powder, 0.2-0.65% of iron powder and 4-6% of chromium powder. Metal conducts plastic deformation and is molten and diffused at high temperature and high pressure and by the aging effect at the high temperature and the high pressure, so that the high-temperature wear-resistant tungsten copper material is obtained. The high temperature wear resistance  material of tungsten copper is good in heat-conducting property, high-temperature strength and high-temperature wear-resistant property, can realize metallurgical bonding with a fine copper substrate, and can be used for manufacturing the lining of the blast-furnace tuyere sleeve, which is good in wear-resistant property and long in service life; the wear-resistant property of the blast-furnace tuyere sleeve can be improved greatly; and the service life of the blast-furnace tuyere sleeve can be prolonged greatly.

Tungsten Copper Parts Picture

The tungsten copper wear resistance nano-powder materials were milled, depending on the ratio of copper powder mixed 2_4h, first at the bottom of the prepared graphite mold Xianpu about O. 5_ thick layer of pure nano-tungsten-copper resistant materials and then mixed in different proportions holes and pure copper powder powder, copper content increased, the thickness of about I. 5mm, the surface layer of about O. 5mm holes and ー thick pure copper powder.

Any feedback or inquiry of tungsten copper alloy products please feel free to contact us via email: sales@chinatungsten.com.

Tungsten Copper Wear Resistance

Tungsten copper wear resistance nano-powder materials were milled, depending on the ratio of copper powder mixed 2_4h, first at the bottom of the prepared graphite mold Xianpu ー about O. 5_ thick layer of pure nano-tungsten-copper resistant materials and then mixed in different proportions holes and pure copper powder powder, copper content increased, the thickness of about I. 5mm, the surface layer of about O. 5mm holes and ー thick pure copper powder. The die set installed hot powder sintering furnace, sintering Eito Arts Figure I shows. The sintering resistant materials combined with copper to form functionally graded materials clean copper surface, the wind ro casting process is placed in Zhu type, embedded directly in the casting process cast in the wind ro sleeve ring surface, so resistant materials combined with wind copper metallurgy between the substrate and the implementation.

A high temperature tungsten copper wear resistance material for a lining of a blast-furnace tuyere sleeve, which is prepared by the following raw materials in percentage by weight: 40-60% of nano copper powder, 36-56% of nano tungsten powder, 0.2-0.65% of iron powder and 4-6% of chromium powder. Metal conducts plastic deformation and is molten and diffused at high temperature and high pressure and by the aging effect at the high temperature and the high pressure, so that the high-temperature wear-resistant tungsten copper material is obtained. The high temperature wear resistance  material of tungsten copper is good in heat-conducting property, high-temperature strength and high-temperature wear-resistant property, can realize metallurgical bonding with a fine copper substrate, and can be used for manufacturing the lining of the blast-furnace tuyere sleeve, which is good in wear-resistant property and long in service life; the wear-resistant property of the blast-furnace tuyere sleeve can be improved greatly; and the service life of the blast-furnace tuyere sleeve can be prolonged greatly.

Tungsten Copper Wear Resistance

Tungsten copper wear resistance material for a lining of a blast-furnace tuyere sleeve, which is prepared by the following raw materials in percentage by weight: 40-60% of nano copper powder, 36-56% of nano tungsten powder, 0.2-0.65% of iron powder and 4-6% of chromium powder. Metal conducts plastic deformation and is molten and diffused at high temperature and high pressure and by the aging effect at the high temperature and the high pressure, so that the high-temperature wear-resistant tungsten copper material is obtained. The high temperature wear resistance  material of tungsten copper is good in heat-conducting property, high-temperature strength and high-temperature wear-resistant property, can realize metallurgical bonding with a fine copper substrate, and can be used for manufacturing the lining of the blast-furnace tuyere sleeve, which is good in wear-resistant property and long in service life; the wear-resistant property of the blast-furnace tuyere sleeve can be improved greatly; and the service life of the blast-furnace tuyere sleeve can be prolonged greatly.

The tungsten copper wear resistance nano-powder materials were milled, depending on the ratio of copper powder mixed 2_4h, first at the bottom of the prepared graphite mold Xianpu about O. 5_ thick layer of pure nano-tungsten-copper resistant materials and then mixed in different proportions holes and pure copper powder powder, copper content increased, the thickness of about I. 5mm, the surface layer of about O. 5mm holes and ー thick pure copper powder.