Tungsten Copper Machining

The method of tungsten copper machining is mainly divided into two categories: infiltration and direct sintering method. In recent years, due to the rapid development of nanotechnology, directly obtained by sintering a great development.The melting point of tungsten, copper vary greatly higher than the boiling point of the copper melting point of tungsten and tungsten copper immiscible, the general method of smelting is difficult to produce tungsten copper alloy, the only powder metallurgy to make tungsten copper composites manufacturing to become a reality. 

Tungsten copper machining include the following methods:

Infiltration Method

High Temperature Sintered Tungsten Copper Alloy

Mixed Powder Sintered Copper Infiltration Method

Direct Sintering Method

Our general method is infiltration, the infiltrated divided into high temperature sintered tungsten skeleton copper infiltration and low-temperature sintering mixed powder copper infiltration two.

The following is the picture about our tungsten copper product with which is used infiltration method:

Tungsten Copper Parts Picture

If you have any other special required on the size or properties, you could contact us by sales@chinatungsten.com, and we could reply you as soon as possible.Sincerely hope could cooperate with you in the near feature.

Tungsten Copper Block

Our tungsten copper block looks like a gold block, it is so beautiful. And the longest length and width we are able to provide is 500mm, and the most thickness is 8mm. We are able to provide the composition with 93W, this material always used on the military industry. The properties of these material is also higher than common materials, so if you have any special required on the properties, you could do not hesitate to contact us.

The following is the block we have finished for your reference:

Tungsten Copper Block Picture

If you have any other special required on the size or properties, you could contact us by sales@chinatungsten.com, and we could reply you as soon as possible. Sincerely hope could cooperate with you in the near feature.

Tungsten Copper Thread Tapping Electrode

Today, we have received an email from our old client, this time, he want to inquiry a new product, tungsten copper thread tapping electrode.

The diameters of his inquiry are M3 x 0.5 and M4 x 0.7, as I am first to receive the inquiry about thread tapping electrode, so I have not experience about this product. At he help of our technical department, I have study that the client have omission the length information. And it will be better to got drawings for these products.

Tungsten Copper Thread Tapping Electrode Picture

If you have any inquiry about tungsten copper thread tapping electrode, please feel free to contact us with sales@chinatungsten.com

Tungsten Copper Rod From Chinatungsten Online

Chinatungsten Online is specialized in manufacturing tungsten copper rod. Tungsten copper rods are usually used in EDM and use as electrode. We are able to provide kinds of specifications, but our standard length are 100mm and 200m, the minimum diameter is 1mm.

Tungsten Copper Rod Picture

Tungsten copper rod is a combination of tungsten and copper. 

The manufacturing process is  press the refractory metal, sinter the pressed compact at a high temperature, and infiltrate it with copper. All this is done under very closely controlled conditions. The result is a relatively hard material with superior arc and wear resistance, high physical Properties: at elevated temperatures, and good electrical and thermal conductivity.

Any feedback or inquiry of tungsten copper alloy products please feel free to contact us: sales@chinatungsten.com.