Tungsten Copper Liner

Tungsten copper liner is made of copper tungsten and face-centered cubic structure of body-centered cubic structure consisting of neither miscible, nor a two-phase mixed structure of intermetallic compounds, often referred to as a pseudo-alloy. Therefore, it has both high strength and hardness, low coefficient of expansion characteristics of tungsten; while there are high plasticity of copper, good electrical and thermal conductivity, this unique combination of properties make tungsten copper alloy is widely used especially due sigh tungsten copper alloy tungsten composite having a high density and high toughness of copper and attention. 

Tungsten Copper Liner Picture

Tungsten copper liner is very sensitive to bomb high charge, the rapid decline in large frying depth to compete with armor, the best fried high as 3 times the diameter size. This is also the presence of tungsten copper liner in common: in a small frying condition of high depth of their armor comparable copper liners increased by about 30%, but to compete in the big frying performance is deteriorating rapidly, the jet can not get ductility. Furthermore, since the metal powder alloy and illiquid, with filling, pressing process many random factors, so that the amount of Liner quality (ie density) distribution is difficult to control, so the performance is unstable, wearing dark volatile A pair of which is to be desired.

Tungsten copper shaped combination of high density and ductility of tungsten copper, compared to copper liners have higher power and armor shaped effect. The disadvantage is that tungsten and copper can not dissolve each other, and because of the density difference between the two large, easy to form when gravity segregation caused by compression molding liners inhomogeneous density distribution.

Tungsten copper alloy as an ideal material for liners, but there is more in the preparation process issue, tungsten copper alloy bonding strength is poor, molding material difficulties; its wear deep fried sensitive to high variability, it should only lower Fried use under high conditions.

Any feedback or inquiry of tungsten copper alloy products please feel free to contact us via sales@chinatungsten.com