我的博客列表

2015年12月15日星期二

Tungsten Copper EFP Liner

Tungsten copper EFP liner having a higher density and strength, mainly used in the current foreign Shaped drug type cast. Studies have shown that three high-caliber bomb under conditions comparable depth of its armor Cu Liner material increased by about 30%. Therefore, W-Cu composite explosive forming Liner munitions will also have great potential.

Scientists have studied the preparation and formability 30W-Cu EFP liners of. Ordinary tungsten powder, copper powder and ultrafine preparing two tungsten-copper composite powders of different bars, and then test the performance forged bars, final selection of material for producing a forged good performance EFP liners. Studies have shown that: the ordinary tungsten powder, copper powder prepared material has good pressure processing performance; prepared density 30W-Cu EFP liners materials 98.2% of theoretical density, tensile strength after annealing material reaches 315 MPa, elongation rate was 15.3%.

By experiment under the same sintering conditions, ultrafine tungsten-copper composite powders prepared density material is superior to the use of the material prepared in the ordinary powder, but the material of ordinary powder preparation has better pressure processing performance.
It can significantly increase the density of tungsten-copper sintered materials by forging, annealing after forging 30W-Cu EFP Liner material density up to 98.2% of the theoretical density. After the heat treatment the tensile strength of the material reaches 315 MPa, elongation rate was 15.3%. 

没有评论:

发表评论