我的博客列表

2016年3月22日星期二

Tungsten Copper Electrode

Tungsten copper electrode is a kind of tungsten copper products, which are also called copper tungsten electrode, tungsten copper alloy electrode. And the tungsten copper electrode are owns the both advantages of tungsten and copper.

Tungsten copper electrodes include EDM electrode, high-voltage electrode discharge tube and electronic packaging materials.

EDM electrode
In view of tungsten steel, high temperature super-hard alloy die to be produced by corrosion, the common electrode wear big, slow, and the W-Cu electrical corrosion of high speed, low loss rate, precise electrode shape, excellent processing performance, to ensure the accuracy of processing pieces of greatly increased.

High-voltage electrode discharge tube
High-voltage vacuum discharge tube in the workplace, the contact material in a few seconds of time zero temperatures thousands of degrees Celsius, while the W-Cu anti-ablation properties, high toughness, good electrical conductivity, thermal conductivity performance to the discharge tube to provide the necessary stability conditions.

Electronic Packaging Materials
Both the low-expansion properties of tungsten, but also has high thermal conductivity properties of copper, its thermal expansion coefficient and thermal conductivity of conductive material can be adjusted to change the composition and thereby to the material provided to facilitate the use.

Tungsten Copper Bar

Tungsten copper bar is a combination of tungsten and copper. The manufacturing process is as follows: press the refractory metal, sinter the pressed compact at a high temperature, and infiltrate it with copper. All this is done under very closely controlled conditions. The result is a relatively hard material with superior arc and wear resistance, high physical Properties: at elevated temperatures, and good electrical and thermal conductivity.

Because of the high eletrical conductivity and low consumption, tungsten copper bars are widely used to make Grid siderod, Lead, Support, Electrode for the Gas discharge lamp.

Tungsten copper bar is composite by tungsten and copper, which owns the properties of both tungsten and copper.
1, Width × Length: (2.0-100.0mm) × (2.0-100.0mm)
2, High: 50-1000mm
3, Density: 12.60-17.05 g/cm3
4, Composition: W 55-90%, Cu 10-45%
5, Surface: Sintering surface, Forged surface, Ground surface

2016年2月18日星期四

Tungsten Copper Plate

What Is Tungsten Copper Plate

Tungsten copper plate is a composite of tungsten and copper. The coefficient of thermal expansion (CTE) of the composite can be designed by controlling the content of tungsten, matching that of the materials, such as Ceramics (Al2O3, BeO), Semiconductors (Si), Metals (Kovar), etc. The products are widely application in the fields such as radio frequency, microwave, high power diode packaging and optical communication system.

Tungsten Copper Plate Introduction
1, Main grades: CuW50, CuW55, CuW60, CuW65, CuW70, CuW85
2, Length: 5mm-200mm
3, Width: 5mm-200mm
4, Thickness: 0.1mm-15mm
5, Semi-finished or finished (Ni/Au plated) products available

It owns not only the low expansion of tungsten and high heat conductivity of copper. Its expansion index and heat conductivity can also be changed through changing the content of the materials, which provides convenience to the using of the material. We can supply various specifications and the tungsten copper plate with different tungsten proportions.



Tungsten Copper Electrode

Tungsten copper electrodes include EDM electrode, high-voltage electrode discharge tube and electronic packaging materials.

EDM electrode
In view of tungsten steel, high temperature super-hard alloy die to be produced by corrosion, the common electrode wear big, slow, and the W-Cu electrical corrosion of high speed, low loss rate, precise electrode shape, excellent processing performance, to ensure the accuracy of processing pieces of greatly increased.

High-voltage electrode discharge tube
High-voltage vacuum discharge tube in the workplace, the contact material in a few seconds of time zero temperatures thousands of degrees Celsius, while the W-Cu anti-ablation properties, high toughness, good electrical conductivity, thermal conductivity performance to the discharge tube to provide the necessary stability conditions.

Electronic Packaging Materials
Both the low-expansion properties of tungsten, but also has high thermal conductivity properties of copper, its thermal expansion coefficient and thermal conductivity of conductive material can be adjusted to change the composition and thereby to the material provided to facilitate the use.

2016年1月12日星期二

Tungsten Copper Combination Electrode

Tungsten copper alloy has a combination of tungsten and copper, high temperature resistance, arc ablation, high hardness, high melting point, high strength, high specific gravity, high conductivity, high thermal conductivity, easy cutting, anti-adhesion, and has a transpiration cooling characteristics. Using isocratic pressing - high-temperature sintered tungsten skeleton - copper infiltration process, the production of copper content 6-90% of various large, shaped pieces, high purity, uniform organization performance; compression molding, extrusion molding, injection molding can produce all kinds of sheets, rods, tubes, plates, and shape of the various models of complex products.
Tungsten copper combines with iron to the composite electrode, to eliminate the pores, cracks problem exists in the past, this process uses a welded composite. Tungsten, copper and iron composite electrode composite made of for both tungsten copper, iron materials, combined with high strength, good electrical conductivity.

1. A reasonable mix of tungsten copper, iron, and its mechanical properties is more reasonable, more convenient to use. The small precision electrode machining deformation problem is a good solution;
2.The electrode is directly adsorbed on the the magnetic work bench grinding after processing, flatness, surface finish and dimensional precision are other processing methods are not comparable. Exudes a sense of superiority in the processing of large planar electrode;
3. The electrode after grinding benchmark reproduction is good, especially suitable for the electrode need a multi-step combinations work;
4. A plurality of electrodes can be processed at the same time, can greatly improve the work efficiency;

Tungsten Copper Powder Metallurgy

Powder metallurgy involves producing metallic powders and preparing a mixture from them with a given chemical composition and specific processing properties; molding powders or mixtures made with them into semi finished products of a given shape and size, chiefly by pressing; and sintering, or heating the semi finished products at a temperature below the melting point of the metal as a whole or of its principal component.
As the melting point of tungsten and copper vary greatly, tungsten melting point of 3410 ℃, much higher than the boiling point of copper and tungsten copper immiscible, so the tungsten-copper composite material prepared by powder metallurgy products out performance is much higher than the legal system prepared copper infiltration products. Further, the powder metallurgy method can improve the material's density.

Tungsten copper powder metallurgy method is the choice of preparing fine tungsten, copper powder, soaked by the sintering process is refined class, can withstand high temperatures and nearly 2,000 high stress, with high melting point, high hardness, resistance to burning and good anti-adhesion resistance, electrical corrosion product surface finish, high precision, low loss. Preparation of alloy powder metallurgy method has good electrical and thermal conductivity, good high temperature strength and certain plasticity.

2015年12月15日星期二

Tungsten Copper EFP Liner Preparation

Tungsten copper blank forging process, the deformation of the matrix material, there are two ways. The first one is just a copper substrate deformation, deformation of tungsten particles does not occur, and the tungsten particles flow along the deformation direction of the base, and finally was streamlined distribution in the matrix. The second way is the copper substrate and the tungsten particles are deformed, copper and tungsten were tested after deformation fibrous. After forging the blank is then annealed microstructure was observed annealing temperature of 500 ° C, time 2 h. below is 30W-Cu EFP liners blank after forging through 500 ° C, 2 h annealing microstructure.

As can be seen from the figure, the copper matrix recrystallization occurs, to form a uniform fine grain structure, tungsten particles are substantially not occur grow and segregation. Fibrous tungsten and not deformed in the forging, heat treatment because of the lower temperature, and recrystallization temperature of tungsten is much higher than the annealing temperature, if the tungsten particles are deformed, then annealed at this temperature after the tungsten particles will remain deformed when organization, which is inconsistent with the experimental observation. Therefore, the deformation mode of tungsten copper blanks belongs to the first mode, metallographic not observed streamline the distribution of the tungsten particles is in the process of forging the metal in the longitudinal and circumferential directions have taken place in the flow of sake.