我的博客列表

2012年8月23日星期四

Tungsten Copper Electrodes

We Supply Tungsten Copper by Press, Sinter & Infiltration method with the tungsten content ranging from 50% to 90% by weight. The balance is copper.
1. Electrical Contact materials
Electrical contacts are subjected to extreme mechanical and thermal stresses during operation. For fractions of a second, temperatures rise to several thousand degrees as a result of the arcing. Only Tungsten Copper materials will stand these high temperature & aberration.
Tungsten Copper material has good resistance to arc erosion, mechanical wear, contact welding and good conductivity. They are usually selected for oil, gas, air or vacuum, devices. The contact surfaces will oxidize when switched in air. These press-sinter-infiltrate materials should only be considered for arcing surfaces in air when used as arcing tips, arc plates and arc runners. When switching with moderate contact arcing, the Tungsten Copper with a high copper content may give the lowest erosion. As arcing severity increases, the Tungsten Copper with the higher refractory content withstand arc erosion better. Tungsten Coppers are also used as arcing edges of selector switchblades in transformer tap changers.
2. Electrodes for Spark Erosion
Tungsten Copper electrodes are best suitable material for electrical discharge machining  applications. It has excellent wear resistance, good metal removal rate and ability to retain good detail. It is used where speed and wear resistance are most important.
3. Resistance Welding
Tungsten Coppers are used for some spot welding application of low conductivity materials, and as die inserts for flash and butt resistance welding applications.
4. Heat Sinks
Modern computer processors like the 586 series and higher, generate a heat output per square centimeter similar to that of a household cooker surface. Tungsten-copper heat sinks and the processor fan remove the heat.

Tungsten Copper Machining

The principal Tungsten/Copper alloys contain from 2% to 45% copper by weight. The addition of copper increases the thermal conductivity of the alloy while reducing the hardness and modulus of rupture.
The machining and grinding characteristics of tungsten/copper alloys are similar to those of hard grey cast iron. Being non-porous, standard water soluble coolants may be used if desired, but are not required. Each machine shop usually has its individual machining or grinding practice and, therefore, the information presented should be considered as a guide only.
Tool: Carballoy, grade 883 or equivalent. Grind tools with 0 deg. rake, 8-12 deg. clearance, and .010" to .025" nose radius. The nose radius can increase with the size of the work. For fine finish, stone small flat on tool parallel to work. Suggest resting stone on work when honing tool.
Turning & Boring: Roughing, approximately .030" deep and .020" per revolution feed. Finishing, .002" to.005" depth of cut and .001" to .002" per revolution feed. Turning speed, 300-500 surface feet per minute. Do not use lubricant or coolant.
Shaping: Tool Speed: 43" per minute for Tungsten-Copper 25% alloy.
Depth of Cut: .030"
Feed: .020" per stroke
Milling: Drilling High Speed steel drills and taps may be used.
Through Tapping: Holes are recommended. Material must be firmly held. Hand feed-lubricant and cutting oil acceptable.
Rough Grinding: Is best done with 80 grit resin bonded wheels of medium hardness; .015" per pass on Tungsten-Copper 25% alloy. Use water or water soluble oil coolant.
Joining: Material may be silver brazed, or copper brazed in a hydrogen atmosphere.
We hope the preceding information will be helpful.

2012年8月20日星期一

Applications for Copper Tungsten Bar

Because of the high electrical conductivity and low consumption, Copper tungsten bars are widely used to make Grid siderod, Lead, Support, and Electrode for the Gas discharge lamp.
1. Resistance welding electrode
It integrates such features of tungsten and copper as high temperature resistance, electrical arc ablation resistance, high proportion, good electrical and heat conductivity, being easy to cut and transpiration cooling. It also owns such advantages of tungsten as high hardness, melting point and adherence resistance. It is often used for projection welding and butt-welding electrode with wear and high temperature resistance.
2. Electric spark electrode
It is used for the electrode of mould made from tungsten steel and high-temperature and ultra hard alloy. The common electrode has high consumption and low rate. The high electrical ablation rate, low consumption ratio, precise electrode size and quality processing performance of Copper tungsten can ensure that the precision of the work piece is greatly enhanced.
3. High-voltage discharge tube electrode
When the high-voltage vacuum discharge tube is working, the temperature of contact material will rise to thousands degree centigrade within several tenths seconds. High ablation resistance, high toughness, good electrical and heat conductivity of Copper tungsten provide necessary conditions to stable operation of the discharge tube.
4. Electrical seal material
It owns not only the low expansion of tungsten and high heat conductivity of copper. Its expansion index and heat conductivity can also be changed through changing the content of the materials, which provides convenience to the using of the material. We can supply various specifications and the Copper tungsten alloys with different tungsten proportions.

Tungsten Copper Military

Tungsten copper alloy is easily to be machined. And with this series of high conductivity, high thermal conductivity and heat resistance fine characteristic, tungsten copper alloy military has been widely used in mechanical, electrical, instruments and other civil industrial, and also is widely in making important as well as complex components for aviation, spaceflight, weapons in the military industry.
The theory of tungsten copper alloy military materials applied as high temperature material in military use is that when the air temperature is close to event exceed the temperature melting point of tungsten (over3, 000 ℃), the content of copper in tungsten copper materials evaporate and then absorb a great deal of heat, which greatly reduce temperature of tungsten copper military made parts.

2012年8月16日星期四

Tungsten Copper Heat Spreader

Introduce(detail):
A heat sink uses its extended surfaces to increase the surface area in contact with the cooling fluid, the air for example. The term is not meant literally, as a heat sink does not have a "magical ability to absorb heat like a sponge and send it off to a parallel universe". Heat transfer theory helps explain practical aspects of how heat sinks work, and can also help to clear up common misconceptions and design mistakes. Approach air velocity, choice of material, fin (or other protrusion) design and surface treatment are some of the design factors which influence the thermal resistance, i.e. thermal performance, of a heat sink. One engineering application of heat sinks is in the thermal management of electronics, often computer CPU or graphics processors. For these, heat sink attachment methods and thermal interface materials also influence the eventual junction or die temperature of the processor(s). Theoretical, experimental and numerical methods can be used to determine a heat sink's thermal performance.
Tungsten Copper high performance composites are fabricated from carefully controlled porous tungsten that is vacuum infiltrated with molten copper. This results in a WCu composite that has high conductivity and a matched low thermal expansion for heat sinks. 
Advantages
High thermal conductivity
Excellent hermeticity
Excellent flatness, surface finish, and size control
Semi-finished or finished (Ni/Au plated) products available

Tungsten Copper for Dart

Today's standard material of tungsten barrel is Tungsten-Nickel-Iron. Tungsten is a very dense material, so darts with a considerable weight can be made quite slim. However, before the tungsten revolution darts were mainly made of brass.
Not only has the density of tungsten and anti-wrestling, while a brass color, copper tungsten darts has become the choice of many people.
Tungsten copper darts, is a much softer material. To show the color of brass, they generally with about 70%~80% Tungsten content. Some darters, especially old-timers, like the grip of these darts as the metal surface develops microscopic pits after they have been thrown for a while.  Copper tungsten darts have become much less common in recent years, with Nickel/Tungsten darts becoming the primary type of high-density darts.

2012年8月14日星期二

Tungsten Copper Rod for EDM

Our tungsten copper rod for EDM die and mould application has below advantage:
-High electrical conductivity bring very good erosion rate. Improve productivity.
-High hardness maintains long life time.
-High density characters present the lowest corner wear.
-Dia. 1mm rod bend demo shows our super infiltration process control capability.
Our tungsten copper rod for EDM die and mould application has below advantage:
-High electrical conductivity bring very good erosion rate. Improve productivity.
-High hardness maintains long life time.
-High density characters present the lowest corner wear.
-Dia. 1mm rod bend demo shows our super infiltration process control capability.