我的博客列表

2012年8月13日星期一

Copper Tungsten Sheet Introduction


1, Main grades: CuW50, CuW55, CuW60, CuW65, CuW70, CuW85
2, Length: 5mm-200mm
3, Width: 5mm-200mm
4, Thickness: 0.1mm-5.0mm
5, Semi-finished or finished (Ni/Au plated) products available
Copper tungstensheet is a composite of tungsten and copper. The coefficient of thermal expansion (CTE) of the composite can be designed by controlling the content of tungsten, matching that of the materials, such as Ceramics (Al2O3, BeO), Semiconductors (Si), Metals (Kovar), etc. The products are widely application in the fields such as radio frequency, microwave, high power diode packaging and optical communication system.
It owns not only the low expansion of tungsten and high heat conductivity of copper. Its expansion index and heat conductivity can also be changed through changing the content of the materials, which provides convenience to the using of the material. We can supply various specifications and the Copper tungsten sheet with different tungsten proportions.

Tungsten Copper Machining

The principal tungsten copper alloys contain from 2% to 45% copper by weight. The addition of copper increases the thermal conductivity of the alloy while reducing the hardness and modulus of rupture.
The machining and grinding characteristics of tungsten/copper alloys are similar to those of hard grey cast iron. Being non-porous, standard water soluble coolants may be used if desired, but are not required. Each machine shop usually has its individual machining or grinding practice and, therefore, the information presented should be considered as a guide only.

Tool: Carballoy, grade 883 or equivalent. Grind tools with 0 deg. rake, 8-12 deg. clearance, and .010" to .025" nose radius. The nose radius can increase with the size of the work. For fine finish, stone small flat on tool parallel to work. Suggest resting stone on work when honing tool.
Turning & Boring: Roughing, approximately .030" deep and .020" per revolution feed. Finishing, .002" to.005" depth of cut and .001" to .002" per revolution feed. Turning speed, 300-500 surface feet per minute. Do not use lubricant or coolant.
Shaping: Tool Speed: 43" per minute for Tungsten-Copper 25% alloy.
Depth of Cut: .030"
Feed: .020" per stroke
Milling: Drilling High Speed steel drills and taps may be used.
Through Tapping: Holes are recommended. Material must be firmly held. Hand feed-lubricant and cutting oil acceptable.
Rough Grinding: Is best done with 80 grit resin bonded wheels of medium hardness; .015" per pass on tungsten copper 25% alloy. Use water or water soluble oil coolant.
Joining: Material may be silver brazed, or copper brazed in a hydrogen atmosphere.
We hope the preceding information will be helpful.

2012年8月9日星期四

Tungsten Copper Military


Tungsten copper military material is fabricated from the two mutual in dissolvable metal of tungsten and copper, which combines the properties of good hardness, high melting point and low coefficient of thermal expansion of tungsten with coppers of high conductivity and high thermal conductivity; it is a kind of well performance composite. Copper tungsten military material not only has good thermal conductivity and low thermal expansion coefficient, but also can design its thermal conductivity and coefficient of expansion by changing its tungsten copper content. 
Tungsten copper military alloy is easy to be machined. And with this series of fine characteristic, so copper tungsten military has been widely used in mechanical, electrical, instruments and other civil industrial, and also is widely in making important as well as complex components for aviation, spaceflight, weapons in the military industrial.
The theory of copper tungsten military materials applied as high temperature material in military use is that when the air temperature is close to event exceed the temperature melting point of tungsten (over3,000 ℃), the content of copper in tungsten copper materials evaporate and then absorb a great deal of heat , which greatly reduce temperature of tungsten copper military made parts. The table below shows the properties of high temperature tungsten copper. 
If you have any interest in our tungsten copper alloy products, please do not hesitated to contact us by email: sales@chinatungsten.com or by telephone:86 592 5129696, we are at your service.

2012年8月8日星期三

Typical Properties of Commonly Used Copper Tungsten Composition


Typical Properties of Commonly Used Copper Tungsten Composition
Composition
Density
Hardness
Resistivity
IACS
Bending Strength
wt. %
g/cm3≥
HB Kgf/mm2≥
µΩ.cm≤
 %≥
Mpa≥
W50/Cu50
11.85
115
3.2
54
--
W55/Cu45
12.30
125
3.5
49
--
W60/Cu40
12.75
140
3.7
47
--
W65/Cu35
13.30
155
3.9
44
--
W70/Cu30
13.80
175
4.1
42
790
W75/Cu25
14.50
195
4.5
38
885
W80/Cu20
15.15
220
5.0
34
980
W85/Cu15
15.90
240
5.7
30
1080
W90/Cu10
16.75
260
6.5
27
1160

If you have any interest in our tungsten copper alloy products, please do not hesitated to contact us by email: sales@chinatungsten.com or by telephone:86 592 5129696, we are at your service.

2012年8月7日星期二

Copper Tungsten Alloy


CopperTungsten alloy is the composite of Tungsten and Copper, which own the excellent performances of Tungsten and Copper, such as heat-resistant, ablate-resistant, high-intensity, excellent thermal and electrical conductivity. It is easy to be machined. It is used widely in such industries as engine, electrical power, electron, metallurgy, spaceflight and aviation. Using CIP formation, sintered tungsten skeleton and infiltrating copper (silver) technology, large size and special shape products of tungsten-copper (silver) composites with 6-90 percent of copper are produced, such as electric contacts, electrode, refractory parts, heat sinks and parts of rocket, We can also produce sheet material, tubing, plate and other small products by mould pressing, extrusion pressing and MIM.
Tungstencopper alloys are used where the combination of high heat resistance, high electrical and/or thermal conductivity, and low thermal expansion are needed. Some of the applications are in electric resistance welding, as electrical contacts, and as heat sinks. As contact material the alloy is resistant to erosion by electric arc. WCu alloys are also used in electrodes for electrical discharge machining and electrochemical machining.
The CuW75 alloy, with 75% of tungsten, is widely used in chip carriers, substrates, flanges and frames for power semiconductor devices. The high thermal conductivity of copper together with the low thermal expansion of tungsten allows thermal expansion matching to silicon, gallium arsenide, and some ceramics. Other materials for this applications are CuMo alloy, AlSiC, and Dymalloy.

2012年8月6日星期一

Machining/Grinding Characteristics of Tungsten Copper Alloy

The machining and grinding characteristics of tungsten copper alloy are similar to those of hard grey cast iron. Being nonporous, standard water soluble coolants may be used if desired, but are not required. Each machine shop usually has its individual machining or grinding practice and, therefore, the information presented should be considered as a guide only.
Tool: Carb alloy, grade 883 or equivalent. Grind tools with 0 deg. rake, 8-12 deg. clearance, and .010" to .025" nose radius. The nose radius can increase with the size of the work. For fine finish, stone small flat on tool parallel to work. Suggest resting stone on work when honing tool.
Turning & Boring: Roughing, approximately .030" deep and .020" per revolution feed. Finishing, .002" to.005" depth of cut and .001" to .002" per revolution feed. Turning speed, 300-500 surface feet per minute. Do not use lubricant or coolant.
Shaping: Tool Speed: 43" per minute for Tungsten Copper 25% alloy.
Depth of Cut: .030"
Feed: .020" per stroke
Milling: Drilling High Speed steel drills and taps may be used.
Through Tapping: Holes are recommended. Material must be firmly held. Hand feed-lubricant and cutting oil acceptable.
Rough Grinding: is best done with 80 grit resin bonded wheels of medium hardness; .015" per pass on Tungsten Copper 25% alloy.
Use water or water soluble oil coolant.
Joining: Material may be silver brazed, or copper brazed in a hydrogen atmosphere.

2012年8月5日星期日

Tungsten Copper Bar


 What is tungsten copper bar?
Tungstencopper bar is a combination of tungsten and copper. The manufacturing process is as follows: press the refractory metal, sinter the pressed compact at a high temperature, and infiltrate it with copper. All this is done under very closely controlled conditions. The result is a relatively hard material with superior arc and wear resistance, high physical Properties: at elevated temperatures, and good electrical and thermal conductivity.
Applications For Tungsten Copper Bar
Because of the high electrical conductivity and low consumption, tungsten copper bars are widely used to make Grid side rod, Lead, Support, and Electrode for the Gas discharge lamp.