What is Tungsten Copper Block

Our tungsten copper block looks like a gold block, it is so beautiful. And the longest length and width we are able to provide is 500mm, and the most thickness is 8mm. We are able to provide the composition with 93W, this material always used on the military industry. The properties of these material is also higher than common materials, so if you have any special required on the properties, you could do not hesitate to contact us.

The following is the block we have finished for your reference:

If you have any other special required on the size or properties, you could contact us by sales@chinatungsten.com, and we could reply you as soon as possible.

Sincerely hope could cooperate with you in the near feature.

How to Make Tungsten Copper

The method of tungsten copper machining is mainly divided into two categories: infiltration and direct sintering method. In recent years, due to the rapid development of nanotechnology, directly obtained by sintering a great development.The melting point of tungsten, copper vary greatly higher than the boiling point of the copper melting point of tungsten and tungsten copper immiscible, the general method of smelting is difficult to produce tungsten copper alloy, the only powder metallurgy to make tungsten copper composites manufacturing to become a reality.

Tungsten copper machining include the following methods:

Infiltration Method

High Temperature Sintered Tungsten Copper Alloy

Mixed Powder Sintered Copper Infiltration Method

Direct Sintering Method

Our general method is infiltration, the infiltrated divided into high temperature sintered tungsten skeleton copper infiltration and low-temperature sintering mixed powder copper infiltration two.

The following is the picture about our tungsten copper maching method: