Tungsten Copper Block

Our tungsten copper block looks like a gold block, it is so beautiful. And the longest lengthand width we are able to provide is 500mm, and the most thickness is 8mm. We are able to provide the composition with 93W, this material always used on the military industry. The properties of these material is also higher than common materials, so if you have any special required on the properties, you could do not hesitate to contact us.

The following is the block we have finished for your reference:

If you have any other special required on the size or properties, you could contact us by sales@chinatungsten.com, and we could reply you as soon as possible.

Sincerely hope could cooperate with you in the near feature.

MSDS of Tungsten Copper Material

Material Safety Data Sheet (MSDS) is a table about data regarding the properties of a particular substance, which may concern instructions for the safe use and potential hazards associated with a particular material or product. Therefore, MSDS is important and necessary for chemicals users.

Of course, the tungsten copper we provided also have MSDS, and more about tungsten copper’s MSDS please feel free to visit: http://www.tungsten-copper.com/MSDS-of-tungsten-copper.pdf

At the same time, following is the picture about our tungsten copper products, which are suitable for the MSDS:

The sheet aims to offer workers and emergency personnel with procedures for handling or working in a safe way, and includes information such as physical data (melting point, boiling point, flash point, hardness, ultimate tensile strength, density, etc.), toxicity, health effects, first aid, reactivity, storage, disposal, protective equipment, and spill handling procedures. The exact format for MSDS can vary from countries to countries by respective national requirement.

Tungsten Copper Electrode

Tungsten Copper Electrode

Well, we have finished our Australian client’s products. My colleague Yuri said that the tungsten copper electrode looks like Torpedo, which are very beautiful. The following are the photos for your reference:

At the same time, we are also able to provide kinds of tungsten copper electrodes, and thanks for our Australian client’s support. Sincerely hope they can use these products successful.

If you have any inquiries about our products, please feel free to contact us.

We are able to provide products as per client’s required.

Tungsten Copper Machining

Tungsten Copper Machining

The method of tungsten copper machining is mainly divided into two categories: infiltration and direct sintering method. In recent years, due to the rapid development of nanotechnology, directly obtained by sintering a great development.The melting point of tungsten, copper vary greatly higher than the boiling point of the copper melting point of tungsten and tungsten copper immiscible, the general method of smelting is difficult to produce tungsten copper alloy, the only powder metallurgy to make tungsten copper composites manufacturing to become a reality. 

Tungsten copper machining include the following methods:

Infiltration Method

High Temperature Sintered Tungsten Copper Alloy

Mixed Powder Sintered Copper Infiltration Method

Direct Sintering Method

Our general method is infiltration, the infiltrated divided into high temperature sintered tungsten skeleton copper infiltration and low-temperature sintering mixed powder copper infiltration two.

The following is the picture about our tungsten copper product with which is used infiltration method: